EKFM range
The EKFM Built in duct sensor is used to measure the temperature of liquids and gases in pipes, air ducts or tanks. The resistance of the sensor is temperature-dependent and is transformed linearly into a current signal of between 4 and 20 mA or a voltage signal of between 0 and 10 V. The transducer is calibrated for the following measureing ranges by default:
-50 to + 50 degrees C, 0 to + 50 degrees C
A special installation flange (MF) is required when installing the sensor in an air duct.
If the sensor is to be used in liquids, a nickel plated brass dip sleeve is required (THMs/200).
In aggressive media, the use of stainless steel (V4A) dip sleeves (THV/200) is recommended.
Dip sleeves and installation flanges are not included in standard delivery and must be ordered separately as accessories.
Please contact us for the correct model to suit your application.