Frimetal PI Commercial evaporators, nominal capacities 1.6 – 25.7 kW, are ceiling evaporators with double air discharge and low height, designed to be placed centrally on the ceiling in the room to provide uniform air distribution and good use of space for preserving fresh or frozen goods. Ideal for hallways or workroom. 3 model ranges and normal or silent versions are available:
* PIA – 2.8 mm Fin Spacing – Fresh goods above +5℃
* PIM – 4.2 mm Fin Spacing – Fresh goods at 0℃/+2℃
* GDP – 7 mm Fin Spacing – Frozen conservation down to -20℃
The Frimetal Industrial PI Series, nominal capacities 8.4 – 60 kW, are evaporators with double air discharge for industrial cold rooms and medium power rapid cooling tunnels, having lower height and smoother air movement than cubic evaporators. They are also available in 3 versions:
* PIM – 4.2 mm Fin Spacing – Fresh goods at 0℃/+2℃ to frozen down to -18℃
* GDP – 7 mm Fin Spacing – Frozen conservation at low temperatures down to -30℃
* PIL – 9 mm Fin Spacing – Very low temperture chambers and tunnels down to -40℃
Frimetal TT evaporators, nominal capacities 29.8 – 150 kW, are double air discharge evaporators designed for rapid cooling tunnels at medium or low temperatures where high air pressure and perfect air distribution throughout the goods placed on the pallets are necessary. Available in 4 versions:
* TTM – 4.2 mm Fin Spacing – Medium temperature tunnels
* TTB – 7 mm Fin Spacing – Medium temperature tunnels
* TTL – 9 mm Fin Spacing – Low temperature tunnels
* TTX – 12 mm Fin Spacing – Very low temperature tunnels down to -40℃
TNH NH3 evaporators, designed to work with refrigerant ammonia pumped, gravity feeding or direct expansion DX system. These units can also work with other refrigerants (R-404A, water-glycol, etc.) as an alternative to the standard copper tube models GR when the ambient condition inside the cold room is harmful for copper. Nominal Capacities between 33,4 and 163 KW
* TNHM – 4.2 mm Fin Spacing – Medium temperature tunnels
* TNHB – 7 mm Fin Spacing – Medium temperature tunnels
* TNHL – 9 mm Fin Spacing – Low temperature tunnels
* TNHX – 12 mm Fin Spacing – Very low temperature tunnels down to -40℃
